Smartshield Modular Sandwich System
The modular sandwich panel system consists of 19 mm thick panels formed from two “skins” of 0.5 mm thick galvanised steel laminated over a wood core. The panels are interconnected using ‘”hat and batten” steel clamping sections which are fitted on site. The fixing screws (on 100 mm centers) are tightened to a pre-set torque figure. This design, in which all the fixings are accessible from within the chamber, thereby meaning that the chamber is constructed from the inside, allows for the chamber to be built up close to existing building walls.
SmartShield Modular Tray System
The tray panels are preformed into “trays” using 2.0 mm thick zinc coated mild steel. The action of the zinc coating is twofold; it provides a finish which is corrosion resistant and protects the steel by a sacrificial action. It also has excellent electrical resistance properties ensuring that contact between the panels and the jointing mechanism is of the necessary high standard. The panels are bolted together at 100 mm centres with a solid tin plated copper clad steel gasket between each of the panel joints. This design ensures the highest shielding performance.
SmartShield Welded System
The chamber consists of 2.0mm thick galvanized steel with zinc coated as per IS277 standards. The GI Sheets are joined by seamless welding technology with the help of MS fabricated structure. Shielding effectiveness of the welded chamber is between 40 dB to 110 dB as per IEEE299 standards.
Specifications:
Model No- MSPL2301,
Anti moisture Mats
Typical dimensions: As per requirement.
Frequency range (Standard):400MHz to 40GHz.
Shielding Effectiveness :> 80dB for IEE 299
Doors : As per requirement.
Floor loading: As per requirement
Penetration panel: Custom size:
Feed-through connectors
HVAC & exhaust extraction
Fire detection/alarm
Turnkey EMC/Anechoic chambers
Turnkey Anechoic/Radome test chamber
Chamber accessories
a) STANDARD ABSORBERS
Pyramidal, Wedge and Convoluted Absorbers for a variety of applications.
Pyramidal absorbers are a conventional pyramid with a square base of uniform thickness, tapered to a point.
Wedge absorbers are used to direct energy in a given path so that it can be efficiently absorbed by large, high performance materials.
For more details visit:
http://www.mvg-emc.com/content/standard-absorbers-2
i) Pyramidal Absorbers – AEP Series
A broadband pyramidal absorber offering excellent absorption over a broad frequency range. Manufactured in two basic geometries, depending on size and performance requirements. Pyramidal absorbers are a conventional pyramid with a square base of uniform thickness, tapered to a point.
For more details visit:
http://www.mvg-emc.com/content/products/standard-absorbers/pyramidal-absorbers-aep-series
ii) Convoluted Absorbers – AEC Series
Broadband convoluted absorbers manufactured from lightweight urethane foam impregnated with a dielectric material. The front surface is rippled, providing a good match to the impinging wavefront. The convoluted material has properties desirable for applications requiring high reflectivity performance in conjunction with low forward scattering characteristics.
For more details visit:
http://www.mvg-emc.com/content/products/standard-absorbers/convoluted-absorbers-aec-series
iii) Wedge Absorbers – AEW Series
A full line of wedge materials to complement our pyramidal absorbers used to direct energy in a given path so that it can be efficiently absorbed by large, high performance materials. The wedge anechoic performance matches those of the pyramids, except that they are polarization sensitive.
For more details visit:
http://www.mvg-emc.com/content/products/standard-absorbers/wedge-absorbers-aew-series
b) ADAPTED ABSORBERS
Absorbers developed to fit specific environmental conditions. Whether for enduring outdoor weather conditions, heavy loads, or dust free clean room requirements,or more, you’ll find a broad selection of absorbers adaptable to specific applications.
For more details visit:
i) Rubberized Absorbers – PC Series
Treated with our new rubberized coating technology, significantly increasing absorber lifespan and durability, these absorbers are recommended for doorways or high-traffic areas. The rubberized coating, which is applied to the absorber top and sides, is abrasion and puncture resistant.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/rubberized-absorbers-pc-series
ii) Walkway Absorbers – AEWW Series
A broadband walkway RF absorber composed of a self-extinguishing polystyrene core placed in an interlocking pattern over a standard AEP type material. This structure is topped with a higher density polystyrene laminate. The AEWW materials offer excellent load bearing and wear characteristics.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/walkway-absorbers-aeww-series
iii) Heavy Duty Walkway Absorbers – AEWW HD Series
The Heavy Duty Walkway Absorber will support loads of up to 800 lbs. A high strength, load bearing grid is integrated into the walkway. This grid enables the walkway to support much heavier loads than standard walkways.
For more details visit:
iv) Extra Heavy Duty Walkways
The ability of these absorbers to withstand higher loads than most walkway materials is due to a unique construction technique. It is composed of a honeycomb sandwich panel shell over a standard AEP type material allowing it to support up to 2000 lbs.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/extra-heavy-duty-walkways
v) Wall Module – AEWM Series
The Wall Module is used in test facilities to absorb interfering signals on a selective basis to help reduce moding problems. It also eliminates moding hot spots and resonance while providing good wide angle performance.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/wall-module-aewm-series
vi) Clean Room RF Absorbers – AEP-X-CR Series
Clean Room RF Absorbers are treated for use in class 10,000 to 100,000 clean room environments. This treatment does not negatively affect the overall performance. These absorbers are used extensively in satellite assembly facilities as well as other aerospace applications.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/clean-room-rf-absorbers-aep-x-cr-series
vii) Medium Power Hollow Absorbers
A broadband, hollow pyramidal shaped absorber. The AEP MPX is made of carbon-loaded polyurethane foam and is light weight due to the hollow construction. This shape and construction allows for excellent impedance matching and minimized reflection. The AEP-36 MPX to AEP-60 MPX absorbers are a conventional pyramid with a square base of uniform thickness, tapered to a point.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/medium-power-hollow-absorbers
viii) Ventilated Absorbers – AEPV Series
Ventilated absorbers are manufactured from special reticulated foam. When used as a vent material, this product allows air to move freely.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/ventilated-absorbers-aepv-series
ix) Laminated Absorbers – AEL Series
High performance multi-layer, lightweight, flat, laminated radar absorbers. These products are made from open cell polyurethane foam layers which are specially impregnated and laminated with flexible adhesives and latex.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/laminated-absorbers-ael-series
x) Weatherproof Absorbers – WP Series
A wide range of weatherproof absorbers including a new product utilizing a specially formulated spray-on vinyl that is electrically neutral and absorbs up to 10 dB better than any other weatherproof absorber on the market.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/weatherproof-absorbers-wp-series
xi) Chebyshev Applications
MVG is one of the most experienced absorber manufacturers in utilizing Chebychev absorber layouts, which have proven to increase material performance by -10 dB to -25 dB.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/chebyshev-applications
xii) AES Series-Lossy Dielectric Slab Material
A series of dielectric foams providing a lossy medium to microwave energy. The AES Series materials are ideally suited for electronic enclosures, radar systems and for other component applications where low levels of RF absorption is desired.
For more details visit:
http://www.mvg-emc.com/content/products/adapted-absorbers/aes-series-lossy-dielectric-slab-material
c) SPECIALTY ABSORBERS
A selection of absorbers developed to fit specific applications such as high power hotspots, EMC immissions and immunity testing, or specifically low or high frequencies.
For more details visit:
i) Broadband Pyramidal Absorber With Truncated Tip
This particular absorber part AEP-26-TRN is of the pyramidal variety and has useful performance over the range 80 MHz to 40 GHz. Constructed from a 26” Pyramid, the truncated tip reduces the overall height of the pyramid to 24”.
For more details visit:
ii) High Power Absorbers
These high power handling absorbers are designed for high energy areas of chambers and equipment. The hollow, pyramidal honeycomb structure allows for quick heat dissipation. Increased power handling is achievable with forced air cooling. Chambers can be partially or fully lined depending on needs.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/high-power-absorbers
iii) EMC Absorbers – AEPH TRN Series
A full array of high-performance / low-cost absorber materials specifically designed to meet the increased performance demands of today’s EMC testing requirements. This product line includes absorbers that satisfy today’s EMC applications.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/emc-absorbers-aeph-trn-series
iv) Hybrid Clean Room Absorbers
The hybrid clean room absorbers are coated in clear latex top and bottom for use in class 100,000 clean room environments. These absorbers are used extensively in satellite assembly facilities as well as other aerospace applications.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/hybrid-clean-room-absorbers
v) Tuned Frequency Absorbers – AET-20
A lightweight absorber material utilizing a dielectric core. Through the use of a phase cancellation principle, attenuation equal to or greater than 20 dB at the design frequency can be achieved.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/tuned-frequency-absorbers-aet-20
vi) Low Frequency Absorbers – AEP-EM Series
To be used to reduce the multiple reflection and resonant conditions typical in shielded rooms at frequencies from 30 MHz to 1000 MHz. These low frequency absorber use materials that have proven to be extremely effective in medium size shielded rooms.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/low-frequency-absorbers-aep-em-series
vii) Millimeter Wave Absorbers – AEC-MM Series
Millimeter wave tapered absorbers offering excellent reflectivity at normal incidence up to 55 dB. This product was developed for chamber applications where the main beam energy of the source antenna is focused on the sidewalls of the chamber as a result of its overall length.
For more details visit:
http://www.mvg-emc.com/content/products/specialty-absorbers/millimeter-wave-absorbers-aec-mm-series
d) FERRITE TILES
MVG supplies a range of ferrite tiles to complement smaller space saving absorbers in compact chambers where space is limited.
For more details visit:
http://www.mvg-emc.com/content/products/ferrite-tiles/ferrite-tiles
2. EMC TEST CHAMBERS
A selection of standard sized chambers for a variety of elctromagnetic compatibility testing requirements. Whether for Emissions, Immunity, compliance or pre-compliance testing, MVG-EMC chambers are customizable and modulable to meet your specifications.
For more details visit:
http://www.mvg-emc.com/content/emc-test-chambers-0
PRODUCTS
a) EMC-10 Anechoic Chamber
The Gold standard for Anechoic Chamber EMC testing, this 10 meter test range ensures fully compliant Emission and Immunity testing and is compliant to CISPR-16 with a measurement zone diameter of 4 meters or greater. The most versatile and accurate of EMC test chambers. Ferrite tiles and hybrid pyramidal absorbers allow for high accuracy and performance while meeting compact space requirements.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/emc-10-anechoic-chamber-0
b) EMC-5 Anechoic Chamber
A 5 meter test range ensuring fully compliant Emission and Immunity testing. Ferrite and hybrid pyramidal absorbers are combined in a unique pattern within a SmartShield high performance chamber. Operating at a 5m test distance, this chamber is compliant to CISPR-16 with a measurement zone diameter of 2-4 meters.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/emc-5-anechoic-chamber
c) EMC-3 Anechoic Chamber
A 3 meter test range ensuring fully compliant Emission and Immunity testing. Ferrite and hybrid pyramidal absorbers are combined in a unique pattern within a SmartShield high performance chamber. Operating at a 3m test distance, this chamber is compliant to CISPR-16 with a measurement zone diameter of 1-2 meters.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/emc-3-anechoic-chamber-0
d) EMC-3C Compact Chamber
This compact 3 meter test range will settle into test areas of limited space while continuing to produce exceptional performance for EMC measurement. Emission quiet zones of up to 1.5m are accommodated with very repeatable results. Suitable for EMC pre-compliance emissions and compliant immunity testing.
http://www.mvg-emc.com/content/products/emc-test-chambers/emc-3c-compact-chamber-0
e) EMC-MC Mini Compact Chamber
Very useful where space is restricted, the EMC-MC will settle into almost any office space. Its small overall size results from the use of our modular SmartShield chamber lined with our AEPH HyPyr-LossTM absorber technology requiring less volumetric space than in a traditional chamber. This mini compact chamber is applicable in pre-compliant EMC and general Research & Development RF testing.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/emc-mc-mini-compact-chamber-0
f) MIL-STD Chamber
A high performance RF-shielded chamber specifically designed for radiated emissions testing in accordance with MIL-STD-461E/F. This chamber can be used for conducted emissions, conducted immunity, radiated emissions, and radiated immunity testing.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/mil-std-chamber
g) Mode Stir Chamber
Our mode stir chamber or reverberation chamber is particularly suited for immunity testing for EMC measurement and special applications for very high-field strength applications (200V/m – 7000V/m). The paddle system ensures that the widest range of frequencies and particularly low frequency performance is maximized. This system meets testing requirements of the IEC61000-4-21 EMC testing specification.
For more details visit:
http://www.mvg-emc.com/content/products/emc-test-chambers/mode-stir-chamber
3. ANTENNA MEASUREMENT CHAMBERS
MVG antenna measurement chambers provide the necessary RF quiet environment in which to conduct many different testing applications such as for automobile and telecom wireless technology, Aerospace & Defense radome and RCS, and more. We offer standard sizes for your convenience but which are customizable to your requirements. These chambers are also modular and therefore easily demountable for relocation.
For more details visit:
http://www.mvg-emc.com/content/antenna-measurement-chambers
PRODUCTS
a) NF or FF Antenna Measurement Chamber
MVG antenna measurement chambers provide the necessary RF quiet environment in which to conduct many different testing applications such as for automobile and telecom wireless technology, Aerospace & Defense radome and RCS, and more. Sized according to customer requirements, these chambers are also modular and therefore easily demountable for relocation.
For more details visit:
b) Compact Range Chambers
Fully equipped compact ranges with serrated-edge or rolled edge reflectors as well as a broad variety of absorber solutions, such as baffle walls. Compact range chambers are specially designed. Please contact us for more information.
For more details visit:
http://www.mvg-emc.com/content/products/antenna-chambers/compact-range
c) Standard Test Cell
With an operating frequency starting at 10kHz and well exceeding 20GHz, the Standard Test Cell (STC) 
creates an ideal environment for testing wireless devices for such technologies as GSM, UMTS, CDMA, Bluetooth, DECT, etc. Developed for the R&D, production and quality control environments where space is critical.
For more details visit:
http://www.mvg-emc.com/content/products/antenna-chambers/standard-test-cell
d) Portable Test Cells
The PTC range consists of several units that have been especially designed 
in conjunction with the world famous John Ramsey (the original inventor of the RF test enclosure) of JRE Test. With an operating frequency exceeding 3GHz, the PTC creates an ideal environment for testing wireless devices for such technologies as GSM, UMTS, CDMA, Bluetooth, DECT, W-LAN, Zigbee, RFID and Wimax to name but a few. Constructed from a welded aluminium, the pre-designed range consists of various sized enclosures to fit most wireless devices from USB dongles to laptop size units.
For more details visit:
http://www.mvg-emc.com/content/products/antenna-chambers/portable-test-cells
4. RF SHIELDED ROOMS
Shielded rooms provide the necessary RF quiet environment in which to conduct many different application tests such as EMC, wireless technology on automotive or military vehicles, MRI scans, etc.
For more details visit:
http://www.mvg-emc.com/content/rf-shielded-rooms
PRODUCTS
a) Shielded Rooms
Shielded rooms provide the necessary RF quiet environment in which to conduct many different application tests such as EMC, wireless technology on automotive or military vehicles, MRI scans, etc. These rooms are built with Smartshield TM modular RF shielding,electromagnetic pulse protection EMPP shielding,TEMPEST (secure communications) shielding and architectural shielding full systems. Radiated Emission: 30MHz ‐ 18GHz Radiated Immunity: 30MHz ‐ 6GHz .
For more details visit:
http://www.mvg-emc.com/content/products/rf-shielded-rooms/shielded-rooms
b) Shielding for MRI Rooms
RF shielding protects from(attenuates)external electromagnetic and radio frequencies which may distort images created by the MRI. The layout and type of magnetic shielding depends on the magnet used in the MRI system.
For more details visit:
http://www.mvg-emc.com/content/products/rf-shielded-rooms/shielding-mri-rooms
5. SHIELDED DOORS
A wide range of shielded door systems: single, double, sliding, acoustic, non-acoustic, automatic, manual, and more, for various applications. Whether you need manually operated personnel doors or fully automated doors suitable for aircraft access, our doors are maufactured to the same high quality as our shielded rooms and complement with excellence any high performance shielding system.
For more details visit:
http://www.mvg-emc.com/content/products/chambers/shielded-doors
6. ACCESSORIES
A large selection of accessories to complete your chamber: masts, turntables, positioners, controllers and more.
For more details visit:
http://www.mvg-emc.com/content/accessories
a) Chamber Accessories
Depending on your testing requirements, you’ll need specific accessories to support your chamber capabilities. We offer a large selection of accessories to complete your chamber: masts, turntables, positioners, controllers and more.
For more details visit:
http://www.mvg-emc.com/content/products/chambers/chamber-accessories
7. TEST AND MEASUREMENT EQUIPMENT
PROVIDING THE GREATEST CHOICE IN EMC TURNKEY SOLUTIONS
MVG and Amplifier Research (AR) recognise that at times clients need more than just individual EMC products to support them with their product testing. They need a trusted advisor they can work with to understand their testing goals and deliver them with quality EMC turnkey solutions to ensure final compliance and a reliable product. For this reason, MVG and AR have teamed up to combine their expertise and product portfolio to offer you more.
So what makes us different? Experts in our fields, we don’t just supply the products, we also manufacturer them. This means no outsourcing to 3rd party suppliers for major individual components, just one point of contact for everything you need to support your end-to-end EMC testing. We offer everything from high power RF EMC amplifiers, antennas, software and accessories, to shielded anechoic chambers, shielded rooms and absorber products that enable testing of large Units Under Test (UUT) for automobile, aerospace and military applications.
For more details visit:
http://www.mvg-emc.com/content/providing-greatest-choice-emc-turnkey-solutions
For further details contact:
Mr. Raghunandan +919989312304